A monitor mounted on the wall takes up less room and creates a relaxing place for working or playing games. Because of this, most modern monitors are VESA-compliant. It indicates that all the holes required to secure the mount to the wall and lift it have been included. You must follow the instructions and proceed with your pleasurable DIY project.
Before you begin, How to Mount a Monitor Without Holes. Some monitors lack holes because they are not VESA compliant. Most people advise buying a new display, but this is expensive.
There is no need to replace your monitor if it is still in good shape and works correctly. You only need an adaptor to turn a hole-free display into a VESA-compatible monitor.
- Two Kinds Of Mounts: Vesa And Non-Vesa
- VESA mount:
- Non-VESA mount:
- Mounting Non-Vesa Monitors With Kits
- Monitor Arm
- Kit For Vesa Adapters
- Buying Guide For Adapter Kits
- How To Mount A Monitor Without Holes? Step By Step Guide
- Monitor mounting with a VESA plate adapter
- Adapters Clips for Monitor Wall Mounting
- Conclusion
- Frequently Asked Questions
Two Kinds Of Mounts: Vesa And Non-Vesa
Knowing the distinction between a VESA mount and a non-VESA mount may help you decide which is best for you. Here is a slight contrast between the two:
VESA mount:
- They are the de facto method of mounting displays on computers.
- They are simple to locate and reasonably priced.
- They offer a wide range of flexibility to put your monitor in the ideal position.
- Typically, installing them is simple.
Non-VESA mount:
- They are less prevalent than VESA mounts.
- They might cost more than VESA mounts.
- Compared to VESA mounts, they provide less adjustment.
- Non-VESA monitor mounting is difficult.
Mounting Non-Vesa Monitors With Kits

The monitors do not have four VESA mounting holes since when they were first introduced, they were not meant to be mounted. Additionally, there is a higher probability that your computer monitor is the same as it was in the past.
But now that you want to mount that display, you’re having trouble because the monitor lacks VESA mounting holes. To convert a non-VESA monitor into a VESA-compatible monitor, let’s look at the equipment you’ll be using:
Monitor Arm
Whatever your desired mounting location, the first kit you’ll use to mount your computer monitor is the monitor arm. To create the best viewing angle with the monitor screen and keep a good posture, you can adjust the monitor’s angle, orientation, and depth with the monitor arm.
So, when it comes to ergonomics, this is a must-have tool for setting up a healthy workspace and gaming station, just like many other essential desk accessories. Additionally, you’ll need to invest in this equipment because you’re interested in creating an ergonomically balanced workstation setup.
Kit For Vesa Adapters
The VESA adapter kit is the second important factor you’ll need for installing your computer monitor if it isn’t VESA compliant. Your non-VESA display can be easily mounted on a mounting tool using a VESA adapter kit, which converts your non-VESA monitor into a VESA monitor. Depending on the monitor’s features and the mount’s VESA types, two different VESA adapter kits are available on the market.
Check out an Interesting Read: Can a 60hz laptop support 144hz monitor?
Buying Guide For Adapter Kits

Although many different VESA adapter kits are available, neither all mounts nor monitors are compatible. Therefore, checking the following items before wasting money on the improper adaptor kit for your display is essential.
- Verify the adapter kit’s specifications to ensure its VESA standards are compatible with the mounting arm’s.
- Verify that the adapter you want is compatible with the size of your monitor. Based on the size of your display, select the appropriate adapter kit.
- Verify the adapter kit’s specifications to see if it can support the weight of your monitors.
- Ensure the VESA plate adapter is appropriate for your monitor’s thickness and bezel height.
How To Mount A Monitor Without Holes? Step By Step Guide
You must follow the directions included with the adapter kit and monitor mount to complete the processes, which are pretty simple and easy to understand. So, the measures that you need to take are as follows:
Monitor mounting with a VESA plate adapter
First, examine how you will use a VESA plate adaptor to mount your non-VESA monitor screen to the arm.
Take the Standard Stand Off the Monitor
Remove your monitor’s stand first, then unplug it from the power supply. Removing the stand can take a few minutes, depending on your monitor model.
Connect the mount to the VESA plate adapter
It’s time to install the VESA adapter plates to the monitor arm after removing the display stand. Screw the adjustable clamps of the VESA plates you purchased through the VESA holes in the monitor arm. To prevent the monitor from slipping off the kit, place all anti-slip rubber pads on the ends of the VESA plates that are holding your display.
Put the adapter kit on the monitor
The monitor screen must then be connected to the adapter kit once the VESA adapter has been mounted to the mounting tool. The monitor should now fit in between the pads once you’ve adjusted the top and bottom adjustable pad lengths to match the size of your monitor.
Using a VESA plate adapter kit here is how to mount a monitor without drilling any holes on a tight budget.
Also Checkout: Can you Use a Gaming Monitor for Work?
Adapters Clips for Monitor Wall Mounting
Investing in a clip mounting kit is another fantastic choice for placing your monitor on the back without VESA mounting holes. Since this method does not require screwing anything into the back of your display, which may put some users off, it is much less disruptive than the prior one.
These kits are frequently available from online retailers, and while the specific model you need will depend on the size of your monitor, the majority of them can be modified to fit various screen sizes.
This kind of mounting kit frequently features four “arms” that attach to various parts of your display and evenly distribute the weight of your monitor. After that, use a mounting kit and bracket to fasten it to the wall. There are also adapter clips that can move in different directions.
You can see the arms around the edge of the monitor because they reach slightly beyond its borders. Although it might not be everyone’s style, everyone we’ve found is always subtly expressive.
Anyone hesitant to screw anything into their monitor should go with this option. They are typically a good option for folks wishing to improve their ergonomic set up on a budget because of their affordability and compatibility with most displays.
Conclusion
As you can see, a display without holes is not completely useless. There are numerous choices. You can purchase an adapter from the manufacturer, a wall mount adapter clip, or an adapter without drilling holes. It is not difficult to install a monitor without holes; all you need is a VESA adapter kit that matches the monitor’s requirements.
Additionally, mounting a non-VESA display without any DIY implementation is significantly simpler now that VESA adapter kits are readily available for practically all popular monitor brands. We hope you’ll find this article to be helpful.
Frequently Asked Questions
Are mounting holes present on every monitor?
Most modern flat-panel TVs and monitors are created with VESA compliance in mind. Look at the back to see if your computer monitor meets VESA requirements. If it complies, you should see the typical four-hole screw pattern at the back of your display.
Is the VESA mount versatile?
TVs and monitors’ backs are the mounting holes. VESA and Universal are the two types of mounting hole layouts (Non-VESA). According to VESA specifications, mounting holes on the back of a screen must be located precisely in the same spot.
Are VESA screws included with monitors?
The screws are not included with the monitor, but they should be in the mounting bracket that fits the 100mm VESA mounting points if you don’t have any screws on hand. The M4 10mm screws should be available from the mount’s manufacturer.
Does TV weigh too much to mount?
There is an inverse relationship between television size and weight. The weight of the television is based on its size. The mounts will be compatible with different VESA standards and regulated for maximum weight. The mount should have no trouble supporting the weight of your television as long as your LCD matches the required specs.
A Curved Monitor Can Be Mounted?
To begin with, because of their distinctive design, curved screens provide significant challenges. Curved screens need unique mounting and positioning compared to flat displays, which are often level with the surrounding wall.
Leave a Reply